Table of Contents
Advertisement
Specifications: Dell Dimension 9200C Service Manual
Audio
Network adapter
Modem
Temperature Sensor
System board connectors:
Serial ATA
Fan
PCI Express x1
PCI Express x16
USB
MDC
Floppy connector
Front panel
Power
Processor power
IEEE 1394
Controls and Lights
Power control
Power light
Hard drive access light
Link integrity light (on integrated network
adapter)
file:///T|/htdocs/systems/dim9200C/en/SM_EN/specs.htm[10/31/2012 8:07:23 AM]
NOTE:
The 10-pin header connector used
for the optional Media Card Reader is
populated with only nine pins for keying
purposes.
six back panel connectors for line-in, line-
out/headphone, rear surround sound,
microphone, side surround sound, and
center/Low Frequency Effects (LFE)
channel
back panel S/PDIF connector
front panel miniature headphone
connector for line-out
front panel microphone connector
RJ45 connector
RJ11 (MDC 1.5) connector and internally
accessible 3-pin header that connects the
modem to RJ11
one 2-pin connector
two 7-pin connectors
two 5-pin connectors (one for the CPU fan
and one for the optional hard drive fan
connector.)
36-pin connector
164-pin connector
10-pin header for optional Media Card
Reader (3.5-inch bay device)
one 12-pin connector
one 26-pin connector
one 40-pin header
one 2 x 12 connector
one 2 x 2 connector
one 2 x 5 header — always connected by
cable to the front panel; supports front
panel IEEE 1394 port
push button
green light — Blinking green in sleep
state; solid green for power-on state.
amber light — Blinking amber indicates a
problem with an installed device; solid
amber indicates an internal power
problem (see "Power Problems" in your
computer Owner's Manual).
green
green light — A good connection exists
between a 10-Mbps network and the
computer.
Advertisement
Table of Contents
