Table of Contents
Advertisement
System Setup: Dell Dimension 9200C Service Manual
Acoustic
Quiet (default) — The hard drive operates at its most quiet setting.
Mode
Suggested — The hard drive operates at the level suggested by the drive manufacturer.
Performance — The hard drive operates at its maximum speed.
(Bypass
default)
NOTE:
Switching to performance mode may increase the amount of noise generated by the hard drive, and the
drive may not see an increase in data transfer rates.
NOTE:
Changing the acoustics setting does not alter your hard drive image.
Security
Displays the current status of your System Setup program's password security feature and allows you to
Admin
Password
verify and assign a new admin password.
(Not Set
default)
Displays the current status of the system's password security feature and allows a new system password to
System
Password
be assigned and verified.
(Not Set
default)
Determines the interaction between the System password and the Admin password.
Password
Changes
(Unlocked
default)
Enables or disables Execute Disable memory protection technology.
Execute
Disable
(On default)
Power Management
Determines how the system responds when AC power is re-applied after a power loss.
AC
Recovery
Off — The system remains off when power is re-applied. You must press the front panel power button
(Off
before the system turns on.
default)
On — The system turns on when power is re-applied.
Last — The system returns to the last power state the system was in just before it was turned off.
Sets the computer to automatically turn on.
Auto
Power
On
Off — Disables the Auto Power On feature.
Everyday — Turns the computer on every day at the time set in Auto Power Time.
(Off
Weekdays — Turns the computer on every day from Monday through Friday at the time set in Auto
default)
Power Time.
NOTE:
This feature does not work if you turn off your computer using a power strip or surge protector.
Sets time to automatically turn on the computer.
Auto
Power
Time
Time is kept in a 24-hour format (hours:minutes). Change the start-up time by pressing the right- or left-arrow
key to increase or decrease the numbers, or type numbers in both the date and time fields.
This feature does not work if you turn off your computer using a power strip or surge protector.
The options are S1, a suspend state where the computer is running in a low-power mode, and S3, a standby
Suspend
Mode
state where the power is reduced or turned off for most components, but system memory remains active.
(S3
default)
Enables or disables the Intel® Quick Resume Technology mode for providing rapid response to power button
Quick
Resume
presses.
Maintenance
Controls the SERR DMI message mechanism.
SERR DMI
file:///T|/htdocs/systems/dim9200C/en/SM_EN/syssetup.htm[10/31/2012 8:07:30 AM]
Locked — Prevents a user without a valid Admin password from being able to modify the System
password.
Unlocked — Allows a user without a valid Admin password to modify the System password.
Advertisement
Table of Contents
