Table of Contents
Advertisement
1 card fully seated
2 card not fully seated
3 bracket within slot
4 bracket caught outside of slot
8. Gently press down on the card retention mechanism to secure the adapter bracket in place.
9. Close the card retention latch by snapping it into place.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
10.
Replace the computer
cover.
11. Uninstall the card's driver. See the documentation that came with the card for instructions.
12. If you removed a sound card:
a.
Enter system
setup, select Audio Controller, and change the setting to On.
b. Connect external audio devices to the audio connectors on the back panel of the computer.
13. If you removed an network-adapter card connector:
a.
Enter system
setup, select Network Controller, and change the setting to On.
b. Connect the network cable to the integrated network connector on the back panel of the computer.
PCI Express Cards
Your computer supports one PCI Express x1 card.
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see
PCI Express
Card."
If you are replacing a card, uninstall the driver for the existing card. See the documentation that came with the card for instructions.
Installing a PCI Express Card
1. Follow the procedures in
"Before You
Begin."
"Removing a
Advertisement
Table of Contents
