System Setup Options - Dell Inspiron 27 7720 All-in-One Owner's Manual

NOTE: If you are connected to the Dell Pro Wireless Keyboard KM5221W, press Fn+F12.
NOTE: It is recommended to shutdown the computer if it is on.
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options
are:
● Windows Boot Manager
● UEFI HTTPs Boot
● UEFI RST Micron 2450 SSD
● Onboard NIC (IPV4)
● Onboard NIC (IPV6)
The boot sequence screen also displays the option to access the System Setup screen.

System setup options

NOTE: Depending on your system and its installed devices, the items that are listed in this section may or may not appear.
Table 28. System setup options—System information menu
Overview
Inspiron 27 7720 All-in-One
BIOS Version
Service Tag
Asset Tag
Manufacture Date
Ownership Date
Express Service Code
Ownership Tag
Signed Firmware Update
Processor Information
Processor Type
Maximum Clock Speed
Minimum Clock Speed
Current Clock Speed
Core Count
Processor ID
Processor L2 Cache
Processor L3 Cache
Microcode Version
Intel Hyper-Threading Capable
64-Bit Technology
Memory Information
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
100 BIOS Setup
Displays the BIOS version number.
Displays the Service Tag of the system.
Displays the Asset Tag of the system.
Displays the manufacture date of the system.
Displays the ownership date of the system.
Displays the express service code of the system.
Displays the Ownership Tag of the system.
Displays whether the Signed Firmware Update is enabled on your system.
Displays the processor type.
Displays the maximum processor clock speed.
Displays the minimum processor clock speed.
Displays the current processor clock speed.
Displays the number of cores on the processor.
Displays the processor identification code.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays the microcode version.
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total system memory installed.
Displays the total system memory available.
Displays the memory speed.
Displays single or dual channel mode.