ELCOM Euro-2100TE User Manual page 23

Switching into the "X" mode:
15-12-2005
X
"Z" - The "Z" mode is used to print various reports. The printing of "Z" reports resets the cash register sales data.
Switching into the "Z" mode:
15-12-2005
Z
"P" - The "P" program mode is used to program all values and functions of the cash register.
Switching into the "P" mode:
15-12-2005
P
"T" - The training mode provides all functions of the "R" mode, but in this mode, the transactions are not
included in the daily or monthly (periodical) reports. The receipts printed in this mode are marked by the text
"Invalid document".
Switching into the "T" mode:
15-12-2005
T
"STANDBY" When the cash register is not operated for certain time limit (see chap. System flags program-
ming) and it is supplied from internal power supply, it will switch into the "Standby" mode. A cash register in
the "Standby" mode has a low consumption of energy. The notification "Standby" appears on the display.
STANDBY
Exit the "STANDBY" mode by pressing the
external power supply then stand by mode is not called.

11:07:39

11:07:39

11:07:39

11:07:39

(MODE) button. In case the cash-register is supplied from
Cash register characteristics
23