System Set-Up; Realignment - Kenwood TK-8360 Service Manual

TK-8360/8360H/8360H
Merchandise received
License and frequency allocated by FCC: K type only
Choose the type of transceiver
Transceiver programming
(Option)
VGS-1
Voice guide &
storage unit
See page 9.
1. Modes
User mode
Panel test mode
PC mode
Clone mode
Firmware version information
Mode
User mode For normal use.
Use by the dealer to check the fundamental
Panel test mode
characteristics.
Panel tuning mode Used by the dealer to tune the transceiver.
Used for communication between the trans-
PC mode
ceiver and PC.
PC programming Used to read and write frequency data and
mode other features to and from the transceiver.
Used to check the transceiver using the PC.
PC test mode
This feature is included in the FPU.
PC tuning mode Used to tune the transceiver using the PC.
Used to transfer programming data from one
Clone mode
transceiver to another.
Firmware version Used to confi rm the internal fi rmware ver-
information sion.
4
TENTATIVE
U
( )

SYSTEM SET-UP

KCT-60
Connection cable
(Option)
KES-3
External speaker Ignition sense cable
See page 9.
Delivery

REALIGNMENT

Panel tuning mode
PC programming mode
PC test mode PC tuning mode
Function
Frequency range (MHz)
450~520
450~520
450~520
See page 4.
A personal computer, programming interface (KPG-46/46A),
and FPU (programming software) are required for programming.
(Option)
See page 6.
KCT-36
Extension cable
(Option) (Option)
KCT-18 KES-5
External speaker
See page 7. See page 9.
2. How to Enter Each Mode
Mode
User mode
Panel test mode
Panel tuning mode
PC mode
Clone mode
Firmware version information
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed using a personal com-
puter, a programming interface (KPG-46/46A, USB adapter
(KCT-53U)) and FPU (programming software).
The programming software can be used with a PC. Fig-
ure 1 shows the setup of a PC for programming.
RF power
Type
25W TK-8360 M
45W TK-8360H K,M
TK-8360H(U) K
45W
(Option)
Operation
Power ON
[ ]+Power ON
Panel test mode+[ ]
Received commands from PC
[ ]+Power ON (One second)
[ ]+Power ON