Establishing A Web-Interface Session Through A Web Browser - IBM Brocade 4 Gb SAN Switch Module Installation Manual

Establishing a Web-interface session through a Web
browser
You can access the switch module through IP-enabled devices that are
connected to the BladeCenter unit management module. An Ethernet
connection to the management-module external ports on the BladeCenter unit
is required. For more information, see the following documents:
v Installation and User's Guide for the BladeCenter unit
v BladeCenter Management Module User's Guide
v BladeCenter Management Module Installation Guide for the BladeCenter unit
To establish a Web-interface session through a Web browser, complete the
following steps:
1. Open a Web browser on the network-management workstation.
2. Type one of the following Web addresses in the address field. These Web
addresses contain default IP addresses.
For I/O bay 3:
http://192.168.70.129
For I/O bay 4:
http://192.168.70.130
3. Press Enter.
The I/O-module Advanced Web Tools interface window opens.
32
Brocade 4 Gb SAN Switch Module: Installation Guide