Connecting To The Switch Module; Establishing A Web-Interface Session Through The Management Module - IBM Brocade 4 Gb SAN Switch Module Installation Manual

For ibm @server bladecenter
Hide thumbs Also See for Brocade 4 Gb SAN Switch Module:
Table of Contents

Advertisement

Notes:
1. Throughout this document, the management-module Web-based user
interface is also known as the BladeCenter management-module Web
interface.
2. Throughout this document, the user name is also known as the login name
or user ID for logging on to interfaces or programs.
3. The sample screens that appear in this document might differ slightly from
the screens that are displayed by your system. Screen content varies
according to the type of BladeCenter unit that you are using and the
firmware versions and options that are installed.

Connecting to the switch module

To use the Advanced Web Tools interface to access and control the switch
module, you must know the IP address for the switch module and have an
existing network connection. If you have to obtain the IP address for the
switch module or establish a network connection, contact your system or
network administrator.
Establishing a Web-interface session through the
management module
To establish a Web-interface session through the BladeCenter unit management
module, complete the following steps:
1. In your browser, in the address field, type:
http://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the BladeCenter unit
management-module interface.
Note: The default IP address for the BladeCenter unit management
module is 192.168.70.125.
2. Click GO or press Enter.
The Enter Network Password window opens.
3. In the User Name field, type the initial default user name, USERID. In the
Password field, type the initial default password, PASSW0RD (the sixth
character is a zero, not the letter O). The user name and password are case
sensitive.
The management-module Welcome window opens.
4. In the Inactive session timeout value field, select the timeout value for
this Web session and click Start New Session.
The management-module main window opens.
30
Brocade 4 Gb SAN Switch Module: Installation Guide

Advertisement

Table of Contents
loading

Table of Contents