IBM Brocade 4 Gb SAN Switch Module Installation Manual page 43

5. In the left navigation pane, under I/O Module Tasks, click Management.
The I/O Module Management window opens.
6. Click the link for either 3 or 4.
The BladeCenter Management window opens.
7. Make sure that the IP address is the same in the Current IP Configuration
and New Static IP Configuration sections.
8. Click Advanced Management.
The BladeCenter Switch Management window opens.
9. To start a Web-interface session, scroll down to the Start Telnet/Web
Session section and click Start Web Session.
The I/O-module Advanced Web Tools interface window opens.
10. To perform switch-module administrative tasks, click Admin, and log in
to the switch. In the User Name field, type the initial default user name,
USERID. In the Password field, type the initial default password, PASSW0RD
(the sixth character is a zero, not the letter O). The user name and
password are case sensitive.
For more information about using the Advanced Web Tools interface, see the
Brocade Advanced Web Tools Administrator's Guide version 5.0.1 or later on the
Brocade switch module IBM Support CD.
Chapter 5. Configuring the switch module through the Advanced Web Tools interface
31