Communication Ports - Siemens RUGGEDCOM RSG2200 Installation Manual

RUGGEDCOM RSG2200
Installation Guide

Communication Ports

The RSG2200 can be equipped with various types of communication ports to enhance its abilities and
performance. With five available slots, the RSG2200 supports a variety of one- or two-port fiber or copper
Ethernet module of various speeds with up to nine 1 Gbps ports.
Figure 15: Port Assignment
Each type of module has a specific location in the RSG2200 chassis:
• Slots 1 to 4 support any combination of two-port fiber or copper Ethernet modules up to 1 Gbps
• Slot 5 supports a one-port fiber or copper Ethernet module up to 1 Gbps
The exact configuration of the device can be determined by reading the factory data file through the ROS user
interface. For more information about how to read the factory data file, refer to the ROS User Guide for the
RSG2200.
Each communication port is equipped with an LED that indicates the link/activity state of the port.
Figure 16: Port LEDs
1. Port LED
The following sections describe the available communication ports:
• Section 3.1, "Copper Ethernet Ports"
• Section 3.2, "Fiber Optic Ethernet Ports"
• Section 3.3, "SFP Optic Ethernet Ports"
• Section 3.4, "GBIC Optic Ethernet Ports"
1 3
2 4
1
5
LED State
Green (Solid)
Green (Blinking)
Off
Chapter 3
Communication Ports
Description
Link established
Link activity
No link detected
19