Cold - Wascom EMERALD W75ES Operating & Maintenance Manual

Emerald series
Table of Contents

Advertisement

Cold

On starting the machine, the door will automatic-
Fig.
ally be locked, the drain valve closed, the cold
54
water valve opened and the pre-wash carried out
as previously described, whereafter the main
wash is started.
As the main wash is started, the drain valve
closes, detergent is admitted and cold water is
filled to the level determined by the level control.
On reaching this level, cold water is closed.
The water level controlled machine will now wash
the fabrics for six minutes. The machine is then
emptied.
Cold water is filled for the first rinse which lasts
one minute, followed by extraction for 30
seconds.
After this extraction comes the second rinse in
cold water concluded with extraction, whereafter
the third rinse is started.
Fabric softener is automatically admitted during
the third rinse. The fabrics are rinsed with cold
water for two minutes followed by a extraction of
four minutes duration. Finally there is a shake out
for half a minute.
Wash Cycles
54
COLD
Time Temp.
(Min.)
Prewash
3
Detergent 1
Drain
0.8
Mainwash
6
Detergent 2
Drain
0.8
Extraction
0.5
Rinse 1
1
Drain
0.8
Extraction
0.5
Rinse 2
1
Drain
0.8
Extraction
0.5
Rinse 3
2
Detergent 3
Drain
1
Extraction
4
Shake-out
0.5
Total time
23
(water fill time
not included)
33
Cold
Cold
Cold
Cold
Cold
1205

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Wascom EMERALD W75ES

This manual is also suitable for:

Emerald w185esEmerald w105esEmerald w125es

Table of Contents