Programming Tip - Wascom EMERALD W75ES Operating & Maintenance Manual

26
• Program the price by using the keypad to
Fig.
enter the number of quarters needed to start
43
the selected wash cycle. For example, press
"1" and "2" to enter 12 quarters for a $3.00
vend price.
• Release the price programming switch. Price
programming of one wash cycle is now
complete. Repeat for the other six cycles,
using any prices in quarters you want.
If you want to raise prices if Extra Extract is also
selected, first program prices for each of the
seven wash cycles. Then program a different
price for each wash cycle plus Extra Extract. For
example, program a price for the Hot cycle. Then
press the Hot button and the Extra Extract button
so arrows point to both. Now program a new
price for the combination of Hot plus Extra
Extract. Typically you would program a price for
the combination that is one quarter higher, but
that's totally up to you. If you later change pricing
of a cycle don't forget to change pricing of the
combination with Extra Extract.
Use of the Gentle Wash button cannot affect
pricing.

Programming Tip:

Too many different prices may confuse
customers. We suggest using three or four
different prices for the seven wash cycles.
Typically Heavy Soil will be the most expensive,
Hot and Warm the second most expensive,
Quick-Wash, Delicate, and Permanent Press the
third most expensive, and Cold least of all. But as
always, pricing is totally up to you . Wascomat
EMERALD SERIES washers give you complete
price flexibility so you can maximize revenue and
beat the competition.
Programming
43
1031