Coin-Operated Machines; Programming; Price Programming - Wascom EMERALD W75ES Operating & Maintenance Manual

Coin-operated machines

The prices of the various wash cycles must be
programmed into the microprocessor. On
EMERALD SERIES washers you can program
different prices for the seven cycles!
You can also program the prices to drop by any
percentage between any hours of any days,
automatically!

Price programming

• Remove the coin box.
• Press one wash cycle button so an arrow
points to it.
• Toggle and hold the price programming switch
Fig.
located at the back of the coin box in the PP
41
(price programming) position.
This transforms the various buttons into a
Fig.
numerical keypad. Numbers 1 - 7 are on the
42
wash cycle buttons, the Extra Extract button is
8, and the Gentle Wash button is 9. The
START button is 0.

Programming

41
42
25
1473
1030