Alarm Setup; Record Time; Record Camera; Motion To Alarm - Nuvico EV-4000 Instruction Manual

5.2 ALARM SETUP

5.2.1 RECORD TIME

5.2.2 RECORD CAMERA

5.2.3 MOTION TO ALARM

RECORD TIME determines the amount of the time the
DVR records after the initial alarm trigger. The user may
choose from 10 to 300 seconds in 10 second intervals. If
additional alarm is triggered during the post record
duration, then the counter is reset, and will record for an
additional set time of the RECORD TIME.
Record camera provides the option of two distinct
recording modes when an alarm trigger occurs:
•
ALL: Any alarm trigger will force all channels to
record.
•
1:1: The channel from which an alarm trigger
occurred will record.
The DVR will treat a motion trigger as an Alarm Trigger.
•
From the LOG, it will be listed as Motion
•
The unit will not send E-mail
55
MPEG-4 DVR