Log Search - Nuvico EV-4000 Instruction Manual

5.2 LOG SEARCH

The logs can be used to search and review directly to a point in time of the recorded data. Alarm,
motion, video loss and system related logs can be searched and played back directly from the time of
the incident.
Press the LOG button to access the log submenu. Use
the directional buttons to navigate to the desired log. UP
and DOWN buttons are used to navigate through the list
of the logs, and LEFT and RIGHT buttons to navigate
through different pages. Pressing the Enter button at the
desired log will start the playback.
System related logs and video loss logs will be played
back in multi channel view mode.
The playback view may be changed to any configuration
after the playback has started.
Video Loss related logs will start the playback in single
channel view mode.
selected a log from the VIDEO LOSS tab.
24
The illustration to the left has
MPEG-4 DVR