Schedule Motion Recording & Alarm Recording; Summary Of Combination - Nuvico EV-4000 Instruction Manual

3.4.4 SCHEDULE MOTION RECORDING & ALARM RECORDING
For instances where a location needs to be recorded using only motion recording at a predetermined
schedule, but also needs to record in case of alarm triggers. Both schedule motion recording and
alarm recording can be used in conjunction to meet the requirement.
The combination of both settings will allow the DVR to record whenever there is a motion detection
during the scheduled time period, but will record any time in case of an alarm trigger. At both
instances, the DVR will record at 30 pictures per second for all channels.

3.4.5 SUMMARY OF COMBINATION

The following is the summary of possible combinations of recording modes.
RECORD MODE
Normal
Motion
Alarm
Schedule
Schedule Motion
Normal and Alarm
Motion and Alarm
Schedule and Alarm
Schedule Motion and Alarm ALARM & SCHEDULE
Any of the MODES within the schedule can be configured
to be run during the scheduled recording time period. The
illustration to the left has modified MODE1 to record at 30
pictures per second. Please verify that the USE for the
camera necessary has been set to ON, and that MOTION
has been set to ON.
ALARM recording has been configured to record at 30
pictures per second. Please verify that the USE for the
camera necessary has been set to ON.
MENU
RECORD
RECORD
ALARM
SCHEDULE
SCHEDULE
RECORD & ALARM
RECORD & ALARM
ALARM & SCHEDULE
40
RECORD ALARM
CAMERA USE CAMERA USE
ON OFF
ON OFF
OFF ON
OFF OFF
OFF OFF
ON ON
ON ON
OFF ON
OFF ON
SCHEDULE
MOTION
CAMERA USE
OFF OFF
OFF ON
OFF OFF
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
MPEG-4 DVR