Digital Zoom; Spot Output; Hdmi Output - Nuvico EV-400 Instruction Manual

2.3 DIGITAL ZOOM

During the Live View mode or during playback, it is possible to zoom-in to a section of the screen to
get a close-up view of the section.

2.4 SPOT OUTPUT

In addition to the main monitor, attaching a spot monitor enables the user to monitor specific channels
independently from the main monitor.
•
By pressing the SPOT button on the remote controller, followed by the channel number will call up
the specified channel in full screen.
•
By pressing SPOT button twice, all the channels will start to sequence in full screen mode.
Sequence Interval can be set from Sequential Setup.
•
When Alarm has been triggered, that specific channel will go into Full Screen Mode.

2.5 HDMI OUTPUT

To activate the digital zoom, select the full
screen display. Press the ZOOM button to
bring up the zoom window.
x 2
Press the directional buttons to move the
zoom windows to the desired location.
Press the [+] button to zoom in the image, or
press the [-] button to zoom out the image.
Press the CANCEL button to return to the
normal view.
x 4
To select resolution of HDMI output,
Press and hold the [1] + LOG buttons at the
simultaneously to change the resolution.
Note: Resolution of HDMI output may not be
true resolution because of stretching. HDMI
cables also carry digital audio.
- 21 -