Table of Contents
Advertisement
F#RE ALARM SYSTEM
IF INSTALLED
General
Your fire alarm system (if installed) is on 24 hours a day, for continuous protection.
In the event of an emergency, the strategically located smoke and heat detectors
will automatically send signals to your system, triggering a loud, interrupted sound
from the Console. An interrupted sound will also be produced by optional exterior
sounders. A FIRE message will appear at your Console and remain on until you
silence the alarm.
In Case Of
1.
Should you become aware of a fire emergency before your detectors sense the
Fire Alarm
problem, go to your nearest Console and manually initiate an alarm by pressing
the panic key pair assigned as FIRE emergency (if programmed by the installer)
as indicated on page 22.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify your local Fire
Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the alarm. The
zone number(s) of the zone(s) in an alarm condition will be displayed at the
Console.
-29-
Advertisement
Table of Contents
Need help?
Do you have a question about the security system and is the answer not in the manual?
Questions and answers