Table of Contents
Advertisement
TROUBLE
CONDITIONS
"Check" and Tile word CHECK on the
console's
display,
accompanied
by a "beeping"
at the
"Battery" Displays
console,
indicates
a trouble condition in the system.
To siience the beeping for these conditions,
press any key.
1.A dispiay
of "CHECK"
and one or more zone
numbers
indicates
that a
problem exists with the displayed zone(s) and requires your attention. If the
CHECK dispiay reiates to a fire zone, CALL FOR SERVICE immediately.
Determine if the zone(s) dispiayed are intact and make them so if they are not. if
the probiem has been corrected, the dispiay can be cieared if you enter the OFF
sequence (user code pius OFF key) twice. if the dispiay persists,
CALL FOR
SERViCE
immediately.
Lii2il
Not all systems
2.if there are wireiess sensors*
in your system, the CHECK condition may aiso
be caused by some change in the environment that prevents the receiver from
hearing a particular sensor. CALL FOR SERVICE IMMEDIATELY
if this occurs.
TYPICAL "CHECK" DISPIAYS
IF YOU CANNOT
CORRECT A
"CHECK"
DISPIAY,
CALL
FOR SERVICE
-26-
Advertisement
Table of Contents
Need help?
Do you have a question about the security system and is the answer not in the manual?
Questions and answers