Download Print this page

Remote Controller - Hitachi EP-A5000 Instruction Manual

Air purifier with humidifying function
Hide thumbs

Advertisement

Operation Buttons and Indicators /
Humidity Level
Indicates approx. humidity level in the
room during operation.
Low
Orange Orange
Operation Mode
Shows the operation mode.
Air Purify, Pollen, Strong
Deodorization
Indicator: Green
When strong deodorization and timer
functions are used in combination,
the indicator blinks in orange.
Humidify, Skin Moisturize
Indicator: Orange
Point the remote controller at the infrared receiver on the purifier when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote
controller squarely to the receiver.
On/Off Button
Press this button to start or
stop operation.
eco Button
Press this button to start or
stop eco operation.
Max button
Press this button to start
max operation.
Note
P.E-OO
shows a page with further description.
Operation Buttons and Indicators
P.E-10, E-14
Moderate
High
Green
Orange Orange
P.E-11
Timer
The indicator is lit when
4-hour timer is set.
(Indicator: Orange)

Remote Controller

P.E-10
P.E-16
P.E-13
The remote control may not work in a room where inverter lighting apparatus or electronic quick
start lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifier, the sensitivity
will be reduced. Operate the controller from the place in front of the purifier whenever possible.
Airflow Level
Indicates airflow rate during operation.
(Indicator: Green)
: Airflow rate during auto operation
: Indicates eco operation is active.
When airflow rate is switched using the airflow button on
the remote controller, the selected airflow rate is indicated.
: Silent
: Med
: Strong or Max (blinking)
P.E-13
Level of air contamination detected
by the odor sensor is shown by how
the indicator is lit. (Indicator: Green)
Clean Humidifying Filter
Shows the time to clean the
humidifying filter. (Indicator: Red)
On/Off Button
P.E-12
Use this button to start
or stop operation and to
switch the operation mode.
Infrared Remote Receiver
Receives remote
control signal.
Air Sensor
P.E-14
Airflow Button
Press this button to switch
airflow rate.
Mode Button
Press this button to switch
operation mode.
Timer Button
Press this button to set
Off-timer.
Sensor Setting Button
Press this button to switch
sensor sensitivity.
P.E-13
P.E-17
P.E-12
P.E-11
P.E-13
P.E-15
E-3

Hide quick links:

Advertisement

loading

  Also See for Hitachi EP-A5000