Table of Contents
Advertisement
Operation Buttons and Indicators /
Humidity Level
Indicates approx. humidity level in the
room during operation.
Low
Orange Orange
Humidity Level
Airflow Level
Indicates airflow rate during operation. (Indicator: Green)
Auto
: Airflow rate during auto operation
: Indicates eco operation is active.
When airflow rate is switched using the
airflow button on the remote controller, the
selected airflow rate is indicated.
: Silent
: Med
: Strong or Max (blinking)
Point the remote controller at the infrared receiver on the purifier when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote
controller squarely to the receiver.
On/Off Button
Press this button to start or
stop operation.
eco Button
Press this button to start or
stop eco operation.
Max button
Press this button to start
max operation.
Note
P.E-OO
shows a page with further description.
Operation Buttons and Indicators
P.E-10, 15
Moderate
High
Green
Orange Orange
Strong
Pollen
Deodorization
Air Purify
Auto
P.E-12
Remote Controller
P.E-10
P.E-17
P.E-13
The remote control may not work in a room where inverter lighting apparatus or electronic quick
start lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifier, the sensitivity
will be reduced. Operate the controller from the place in front of the purifier whenever possible.
Operation Mode
P.E-11
Shows the operation mode.
Air Purify, Pollen, Strong
Deodorization
Indicator: Green
Humidify, Skin Moisturize
Indicator: Orange
(Approx.)
Skin
Humidify
Moisturize
Timer(4hrs)
Clean
Max(Blinking)
Humidifying
Filter
Clean Humidifying
Filter
P.E-18
Shows the time to
clean the humidifying
filter. (Indicator: Red)
On/Off Button
Use this button to start or stop opera-
tion and to switch the operation mode.
Air Sensor
P.E-14
Level of air contamination detected by the
dust sensor and odor sensor is shown by
how the indicator is lit. (Indicator: Green)
Air
Sensor
Infrared Remote Receiver
Receives remote control
signal.
Timer
The indicator is lit when
4-hour timer is set.
(Indicator: Green)
Airflow Button
Press this button to switch
airflow rate.
Mode Button
Press this button to switch
operation mode.
Timer Button
Press this button to set
Off-timer.
Sensor Setting Button
Press this button to switch
sensor sensitivity.
P.E-14
P.E-13
P.E-12
P.E-11
P.E-13
P.E-16
E-3
Hide quick links:
Advertisement
Table of Contents
