Date/Time Settings - JVC GR-DVF10U Instructions Manual

MENU Button
Power lamp
Select Dial
Display
REC MODE SP
WIDE MODE OFF
ZOOM 64X
GAIN UP AGC
TELE MACRO OFF
4
TO DATE / TIME MENU
TO SYSTEM MENU
DEC 25 ' 98
: 30
– – – – – – – – – –
END 6
ON SCREEN OFF
DISPLAY ON
4 DATE / TIME 1 . 1 . 00
00 : 00
RETURN
Power Switch
Recording Menu
Date/Time Menu

Date/Time Settings

Date and time will automatically be recorded on tape at
all times. It is your choice to display it or not during
playback ( pg. 41).
1
SELECT OPERATION MODE
Set the Power Switch to "PRO.".
•The power lamp comes on and the camcorder is
turned on.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS DATE/TIME MENU
Move the highlight bar to "TO DATE/TIME MENU"
by rotating the Select Dial. Press the Select Dial and
the Date/Time Menu appears.
4
INPUT DATE AND TIME
Move the highlight bar to "DATE/TIME" by rotating
the Select Dial. Press the Select Dial and "day" is
highlighted and begins blinking.
Rotating the Select Dial, input the day. Press the
Select Dial. Repeat the procedure to input the month,
year, hour and minute.
•Press the Select Dial twice when the highlight bar is
set to "RETURN" to exit.
NOTE:
Even if you select "DATE/TIME", if the parameter is not
highlighted the camcorder's internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (day), the clock stops. When you finish
setting the minute and press the Select Dial, the date and
time begin operation from the date and time you just set.
9
EN