JVC GR-DVF10U Instructions Manual page 57

NOTES:
Audio dubbing is possible using an optional microphone connected to the external microphone input
connector (MIC).
While an optional microphone is connected, the built-in microphone is disabled.
When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded separately.
To select the desired sound for playback, press AUDIO MONITOR on the remote control.
If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded
areas.
If feedback or howling occurs during TV Playback, move the camcorder's microphone away from the TV, or
turn down the TV's volume.
Sound is not heard from the speaker during Audio Dubbing.
If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.
During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz
or a blank portion, Audio Dubbing stops and "ERROR! REFER MANUAL" appears.
Recording sound
32 kHz
Display
FULL SOUND Original and new tracks are combined and output in stereo.
SOUND 2 New track is output on both "L" and "R" channels in stereo.
SOUND 1 Original track is output on both "L" and "R" channels in stereo.
Output sound
57
EN