Advanced Features - JVC GR-DVF10U Instructions Manual

RECORDING
MENU Button/
DISPLAY Button
Select Dial
Display
REC MODE SP
WIDE MODE OFF
ZOOM 64X
GAIN UP AGC
TELE MACRO OFF
4 TO DATE / TIME MENU
TO SYSTEM MENU
DEC 25 ' 98
: 30
– – – – – 6 – – – – –
END
ON SCREEN OFF
DISPLAY ON
DATE / TIME 25 . 12 . 99
16 : 40
4
RETURN

Advanced Features

Power Switch
Recording Menu
Date/Time Menu
Displaying The Date And Time During
RECORDING
Recording
When the Power Switch is set to "PRO.", you can choose
whether to display the date and time during recording or
not. You must first set the date and time ("Date/Time
Settings", pg. 9). Set "DISPLAY" to "ON" in the Date/
Time Menu. The Date/Time is always displayed when the
Power Switch is set to "AUTO".
1
SELECT OPERATION MODE
Set the Power Switch to "PRO.".
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS DATE/TIME MENU
Move the highlight bar to "TO DATE/TIME MENU"
by rotating the Select Dial. Press it and the Date/Time
Menu appears.
4
SELECT FUNCTION
Move the highlight bar to "DISPLAY" by rotating the
Select Dial, then press it.
5
SET FUNCTION PARAMETERS
Cycle through the available settings of the selected
functions by rotating the Select Dial and stop when
the one you want is displayed. Then press it and the
highlight bar automatically moves to "RETURN".
6
CLOSE RECORDING MENU
Press the Select Dial twice. Selection is complete and
the menu disappears.
NOTES:
Connect the camcorder to a TV and set "ON SCREEN"
to "ON" in the Date/Time Menu. The display appears on
the connected TV .
The Indicator/Display function overrides these settings.
Even if you have set "ON SCREEN" to "ON", pressing
DISPLAY for longer than 1 second removes the
indications from the screen. Pressing it for longer than 1
second again makes the indications re-appear ("LCD
Monitor/Viewfinder Indications",
21
EN
Advanced Features
pg. 15).