During Playback; Warning Indications - JVC GR-DVF10U Instructions Manual

1
32kHz SOUND1
TAPE END
ERROR !
REFER MANUAL
TC 01 : 28 : 15
– – – – –
VOLUME
6

Warning Indications

Indications
LENS COVER
TAPE!
TAPE END
SET DATE/TIME!
E01 — E06
ERROR!
REFER MANUAL
2 3
LP 4
6e
E01
25 . 12 . 99
16 : 40
– – – – –
6
5
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
battery power is exhausted, power turns off automatically.
Appears when no tape is loaded, or when the erase protection tab is set to "SAVE".
Appears if dirt is detected on the heads during recording.
Appears if condensation occurs. When this indication is displayed, the camcorder turns
off automatically.
Appears for approx. 10 seconds after power is turned on. Also blinks when the clock
(lithium) battery is either not installed or has discharged. Install or replace the old
battery with a new one.
Blinks for approx. 5 seconds when power is turned on with the lens cover closed.
Appears for 10 seconds after power is turned on if there is no tape loaded.
Appears when the tape ends during recording or playback.
Appears when the date/time is not set.
Appears when the clock (lithium) battery is discharged and the previously set date/
time is erased.
The error indications (E01 — E06) show what type of malfunction has occured. When
an error indication appears, the camcorder turns off automatically. Remove the power
supply (battery, etc.), clock battery and wait a few minutes for the indication to clear.
When it does, you can resume using the camcorder. If the indication remains, consult
your nearest JVC dealer.
Appears when Audio Dubbing is unavailable.
LCD Monitor/Viewfinder Indications

During Playback

No.
1
Displays the sound mode.
2
Displays the recording mode.
3
Appears while a tape is running.
4
3 : Fast-Forward/Shuttle search
2 : Rewind/Shuttle search
6
64 : Forward slow-motion
16 : Reverse slow-motion
e
4
Displays the date/time.
5
Displays the brightness of the LCD monitor
or the speaker volume.
4
6
Displays the time code.
Function
Function
: Playback
: Pause
: Audio Dubbing
(
blinks. When the
67
EN
( pg. 41)
( pg. 41)
pg. 17, 38)
( pg. 41)
( pg. 10)
( pg. 70)
( pg. 8)
( pg. 14)
( pg. 15)
( pg. 9)
( pg. 9)
( pg. 62)
( pg. 56)