Table of Contents
Advertisement
Date/Time Settings
The date/time is recorded onto the tape at all times,
but its display can be turned on or off during
playback. (
pg. 38, 49)
POWER Lamp
MENU Wheel
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press the MENU Wheel in. The Menu Screen
appears.
GR-DVX707/507 only
4
Rotate the MENU Wheel to select
"n DISPLAY", and press it. The DISPLAY Menu
appears.
GR-DVX707/507 only
Power Switch
OFF
Lock Button
W I PE
/
FADER
OF F
PROGR
AM AE
EXPOSURE
W. BAL
AN E
C
CAMER
A
MANUA
L
SYSTE
M
D I SPL
AY
DSC
END
ON SC
RE N
E
–
LCD / TV
DATE /
T
I ME
–
A
U
T
O
T I ME CODE
–
O
F F
CLOCK
2
5
.
12 .
02
ADJ .
17 3 0
:
RETUR
N
5
Rotate the MENU Wheel to select "CLOCK
ADJ.", and press it. The parameter for "Day" is
highlighted.
6
Rotate the MENU Wheel to input the day, and
press it. Repeat to input the month, year, hour
and minute.
GR-DVX707/507 only
7
Rotate the MENU Wheel to select "BRETURN",
and press it twice. The Menu Screen closes.
Built-in Clock's Rechargeable Lithium Battery
To store the date/time in memory, the clock's
rechargeable lithium battery is integrated in the
camcorder. While the camcorder is connected to an
AC outlet using the AC Adapter, or while the battery
pack attached to the camcorder continues to supply
power, the clock's rechargeable lithium battery is
always charged. However, if the camcorder is not
used for approx. 3 months, the clock's lithium
battery will become discharged and the date/time
stored in memory will be lost. When this occurs, first
connect the camcorder to an AC outlet using the AC
Adapter for over 24 hours to charge the clock's
rechargeable lithium battery. Then perform the date/
time setting before using the camcorder.
Note that the camcorder can be used without setting
the date/time.
NOTE:
Even if you select "CLOCK ADJ.", if the parameter is
not highlighted, the camcorder's internal clock
continues to operate. Once you move the highlight
bar to the first date/time parameter (day), the clock
stops. When you finish setting the minute and press
the MENU Wheel in, the date and time begin
operation from the date and time you have just set.
15
EN
CLOCK
5 2
.
12 .
02
ADJ .
17 3 0
:
Advertisement
Chapters
Table of Contents
