Audio Dubbing - JVC GR-DVF10U Instructions Manual

56
EN
Display
Speaker
External stereo
microphone
input connector
(Connector is
under the cover.)
T
DISPLAY
PLAY
RM-V712U
(provided)
USING THE REMOTE CONTROL UNIT
6e
Audio Dub
Standby Mode
Power
Switch
Remote sensor
Stereo
microphone
AUDIO
MONITOR
W
A.DUB
PAUSE
STOP

Audio Dubbing

The audio track can be customized only when recorded
on the 32 kHz mode (
NOTES:
Audio Dubbing is not possible on a tape recorded at 48
kHz, on a tape recorded in the LP mode or on a blank
portion of a tape.
To perform Audio Dubbing while watching in the
television, make connections (
1
FIND EDIT-IN POINT
Play back the tape to locate the point where editing
will start, then press PAUSE (6).
2
ENGAGE AUDIO DUB STANDBY
While holding A. DUB (e) on the remote control,
press PAUSE (6). "6e" appears.
3
BEGIN DUBBING
Press PLAY (4), then begin "narrating".
•Speak into the microphone.
4
PAUSE DURING DUBBING
Press PAUSE (6).
5
STOP DUBBING
Press STOP (5).
pg. 26).
pg. 42).
(cont.)