JVC GR-DVF10U Instructions Manual page 27

Select Dial
Display
FOCUS AUTO
EXPOSURE AUTO
W. BALANCE AUTO
4
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
RETURN
FADER / WIPE
WIPE – SHUTTER
P
R RANDOM
?
OFF
SEL. 4 FADER – WHITE
W
H
FADER – BLACK
B
K
FADER – MOSAIC
FADER – B.W
B W
MANUAL
W
H
PAUSE
[Ex.: W FADER – WHITE]
H
Fade-in
Recording Start/
Stop Button
Manual Mode Item
Menu
Fader/Wipe Menu
Fade-out
Fade/Wipe Effects
These effects let you make pro-style scene transitions. Use
these to spice up the transition from one scene to the next.
You can also vary transitions from scene to scene.
EFFECT SELECTION
1
ACCESS MANUAL MODE ITEM MENU
Set the Power Switch to "PRO.", then press the Select
Dial.
2
ACCESS FADER/WIPE MENU
Rotate the Select Dial to move the highlight bar to
"FADER/WIPE", then press it.
3
SELECT EFFECT
Rotate the Select Dial to move the highlight bar to the
desired function, then press it.
•The Fade/Wipe Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
FADE/WIPE SELECTION
( , , , ,
W B
B W
K
H
)
? R
A scene gradually appears on a black, white, or black-and-
white screen or mosaic pattern (Fade-in or Wipe-in); or
disappears, leaving a black, white, or black-and-white
screen or mosaic pattern (Fade-out or Wipe-out).
Fade or Wipe works when recording is started or when
you stop recording.
Before the following step, perform the above steps 1
through 3.
4
START OR END RECORDING
Press the Recording Start/Stop Button to activate
Fade-in/out or Wipe-in/out.
NOTE:
pg. 28.
EN
, , , , ,
27
and