User Maintenance - JVC GR-DVF10U Instructions Manual

USER MAINTENANCE

LENS COVER Open/Close Ring
Set to "POWER OFF".
Monitor Open
Button
OPEN/EJECT
NOTES:
Avoid using strong cleaning agents such as benzine or alcohol.
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
Mould may form if the lens is left dirty.
When using a cleaner or chemically treated cloth refer to the cautions of each product.
When removing the eyepiece, be sure to hold the viewfinder securely.
BATTERY RELEASE
PUSH HERE
Remove.
After Use
1
Set the Power Switch to "POWER OFF" to turn off
the camcorder.
2
Press the Monitor Open Button and open the LCD
monitor to an angle over 45 degrees. Press OPEN/
EJECT in the direction of the arrow then swing the
cover open until it locks. The cassette holder opens
automatically. Remove the cassette.
3
Press "PUSH HERE" to close the cassette cover.
4
Close and lock the LCD monitor.
5
Slide BATTERY RELEASE to remove the battery pack.
6
Turn the LENS COVER Open/Close Ring to close
the lens cover.
Cleaning The Camcorder
1
CLEAN EXTERIOR
Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry
cloth.
2
CLEAN LCD MONITOR
Open the LCD monitor and wipe gently with soft
cloth. Be careful not to damage the monitor. Close
the LCD monitor.
3
CLEAN LENS
Blow it with a blower brush, then wipe gently with
lens cleaning paper.
4
REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it out.
5
CLEAN VIEWFINDER
Remove dust using a blower brush.
6
RE-ATTACH EYEPIECE
Re-attach the eyepiece and turn it clockwise.
63
EN