Custom Setup - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.2 C
1.2 .1 A
When your navigating environment or task changes, you must adjust the radar. In-
stead of changing radar settings case by case, you can assign the C STO
provide best settings for common conditions.
There are three default custom setups for the internal computer of the radar (see the
table on the next page). You can adjust these settings on the [Custom 1], [Custom 2]
and [Custom 3] menus to meet your navigation needs.
To activate a custom setup, press the C STO
tween Custom 1, Custom 2 or Custom 3 each time you press the key. (Custom setup
numbers which are turned off are ignored.) The selected custom setup name is shown
at the upper-left corner. To escape from custom setup, operate any control.
1.2 .2 D i i
i
[Custom1(2 or 3)]
[Copy]
[Gain Mode]
[Manual Gain]
[Sea Mode]
[Auto Sea]
[Manual Sea]
[Rain Mode]
[Auto Rain]
[Manual Rain]
[A/C Auto]
1-
S
s ription o
Av i
Turn on/off each custom program.
Copy settings from the [Echo] menu. The message Com-
plete appears after the copying is completed.
A Automatic gain adjustment according to noise level
Manual gain adjustment
Copy the current position of the
[Copy]. This item is for read-only.
A Automatic sea clutter adjustment according to sea
state
Manual sea clutter adjustment
C Suppress both land and sea clutter.
A v Automatically discriminate land echoes from
sea reflections to suppress only sea reflections.
Copy the current position of the A C SEA knob when you do
[Copy]. This item is for read-only.
A Automatic rain clutter adjustment according to rain
cloud
Manual rain clutter adjustment
C For light rain
When you can not reduce the rain clutter with
[Calm] mode
R For heavy rain
Copy the current position of the A C RAIN knob when you do
[Copy]. This item is for read-only.
[Off], [On]
key. The C STO
i
sto s t p it s
i
AIN knob when you do
key to
key switches be-
S i
1.9
1.10
1.10
1.11
1.11
1.12