Navigation Data; Navigation Data At The Bottom Of The Screen - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
To show or hide the navigation data at the bottom of the screen, do the following:
1. Press the
2. Use the Cursorpad (S or T) to select [Display] and press the
3. Use the Cursorpad (S or T) to select [Data Box] and press the
4. Use the Cursorpad (S or T) to select an option and press the
Off Turn off the data display.
a
Tar et ARPA and AIS target data (See section 3.8 and 4.5.)
5. Press the
1. namic Ran e
You can change the dynamic range to erase unwanted weak echoes (sea reflections,
etc.). Select [Narrow], [Normal] or [Wide] depending on conditions.
1. Press the
2. Use the Cursorpad (S or T) to select [Echo] and press the
3. Use the Cursorpad (S or T) to select [Display-Dynamic] and press the
key.
4. Use the Cursorpad (S or T) to select [Narrow], [Normal] or [Wide] then press the
T R key.
arrow Erase weak echoes.
orma
ide Display weaker echoes compared to [Narrow].
5. Press the
1-
key to open the menu.
a a ox op ions

Navigation data

Navigation data plus ARPA and AIS target data
key to close the menu.
key to open the menu.
ispla
Normal use
key to close the menu.
nami op ions
T R key.
T R key.
T R key.
T R key.
T R