Characteristics Curve - Furuno 1835 Operator's Manual

1. haracteristics ur e
You can change the characteristics curve to reduce unwanted weak echoes (sea re-
flections, etc.). Select [1], [2] or [3] depending on conditions when unwanted weak
echoes hide wanted targets.
1. Press the
2. Use the Cursorpad (S or T) to select [Echo] and press the
3. Use the Cursorpad (S or T) to select [Display-Curve] and press the
4. Use the Cursorpad (S or T) to select [1], [2] or [3] then press the
1 Reduce weak echoes.
2 Normal use
Display weaker echoes in stronger color compared to [1].
5. Press the
key to open the menu.
ispla
3
Strong
Echo color
strength
Input level
ispla
key to close the menu.
1. DESCRIPTION OF OPERATION
e op ions
2
1
Strong
e
T R key.
T R key.
T R key.
1-