Ais Target Data - Furuno 1835 Operator's Manual

When there are many activated targets on the screen, you can not easily distinguish
the activated targets from the radar images or ARPA targets. You can sleep an acti-
vated target for easy view of radar images.
T iv
T
. AIS T
You can show the AIS target data in the data box at the bottom of the screen. To dis-
play AIS target data, the menu item [Display] on the [AIS] menu must be set for [On]
and the menu item [Data Box] on the [Display] menu must be set for [Target] or [All].
1. Use the Cursorpad to put the cursor on an activated target.
2. Press the ENTER key to show the data of the target.
Bearing, range, course, speed
CPA, TCPA, Length, Beam of vessel
To remove the target data from a data box, put the cursor on its target symbol and
press the CANCE
S pin tar
Put the cursor on the target and press the ENTER key.
Put the cursor on the target and press the CANCE
D
Cursor
PEGASUS
Data box
Vector reference
Vector time
TRUE 05:00 <AIS> MMSI: 123456789 NAME: PEGASUS
BRG 53.7°T RNG
CPA 1.65NM TCPA
S tar t ata
OFF key.
t
+
AIS target
selected for
data display
Name of vessel
(or MMSI)
MMSI of vessel
2.987NM COG 350.4°
06:14 LEN 100M
4. AIS OPERATION
OFF key.
Name of
vessel
SOG 23.45KN
BEAM 45M
-