Menu Items On The [Echo] Menu; Remote Display - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.44.3

Menu items on the [Echo] menu

[Color Erase]: Erase the lower echo color whose level is set here. Set a large value
to display only the stronger echoes.
1.45

Remote Display

You can use this radar as a remote display when you set [Input Source] to [Slave] on
the [Installation] sub menu. When this setting is done, the menu and display change
as described below. To display the radar image on the remote display, transmit from
the main radar.
Note: The message "Please turn to STBY-mode when you change this setting." ap-
pears when you switch the mode in transmission.
Unavailable menu items
The menu items are not available with the remote display as shown in the table.
[Echo]
[Custom 1, 2, 3]
[Alarm]
[Tuning]
[System] - [Sector Blanks]
[System] - [Installation]
Display appearance
The display changes as shown in the following illustration.
s not
Transmitting or standby display indications for remote display
1-56
Color Erase setting window
Menu
[Pulse Length], [2nd Echo Rejector]
[Pulse Length]
[Watchman]
All menu items are inoperative.
All menu items are inoperative.
[Antenna Rotation], [MBS Adjust],
[Auto Install Setup], [Total TX Time]
ulselength
spl e
S E
12
E
S 1
Unavailable menu item(s)
Sho n hen spl
un t unct ons s
re ote spl
I
°
3
I
un ng n c tor
s not spl e
1
2
WTC is not displayed.