1. DESCRIPTION OF OPERATION
1.13
Cursor
The cursor functions to find the range and bearing (default function) to a target or the
latitude and longitude position of a target. Use the Cursorpad to position the cursor
and read the cursor data at the screen bottom.
Cursor data
You can show the cursor data as range and bearing (from your ship to the cursor) or
latitude and longitude. Position and heading signal are required.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Others] and press the ENTER key.
1-14
0.5
NM
+
110.1° R
0.488 NM
Cursor data
(range and bearing,
or latitutde and longitude)
so da a
e s men
+
Cursor