Introduction; About This Guide - Extron electronics FOX Matrix 320x Setup Manual

vi FOX Matrix 320x and FOX Matrix 14400 • Contents

Introduction

WARNING: The fiber optic I/O boards of the FOX matrix switchers
output continuous invisible light, which may be harmful to the eyes;
use with caution.
Do not look into the fiber optic cable connectors or into the fiber
optic cables themselves.
Plug the attached dust caps into the optical transceivers when the
fiber cable is unplugged.
AVERTISSEMENT : L'appareil émet une lumière invisible en continu,
à utiliser avec precaution.
Ne regardez
pas dans les connecteurs de câble fibre optique sur
le panneau arrière ou dans les câbles fibre optique eux-mêmes.
Branchez les protections contre la poussière dans l'ensemble
émetteur/récepteur lorsque le câble fibre optique est débranché.
This section provides an overview of the Extron FOX Matrix 320x and
FOX Matrix 14400 and describes their features. Topics that are covered
include:
•

About this Guide

•
About the FOX Matrix Switchers
About this Guide
NOTE: For more information on any subject in this guide, see the
FOX Matrix 320x and FOX Matrix 14400 Series User Guide, available
at www.extron.com.
This setup guide helps you to easily and quickly set up and configure
your FOX Matrix 320x and FOX Matrix 14400 switcher. Step by step
instructions show you how to:
•
Install the input and output boards
• Connect the hardware
• Use selected Simple Instruction Set (SIS) commands to perform
basic operations
•
Load and start the Matrix Switchers Control Program
•
Connect to the built-in HTML
the switcher
FOX Matrix 320x and FOX Matrix 14400 • Introduction
pages, which you can use to operate
1