8.
Seat the selectable bay connector and connect its cables to PJ601 and PJ604 on
the system board. Again, be sure to unlatch the pressure connectors first.
9.
Secure one M2.5x8 screw and three M2.5x4 flat-head screws on the metal
cover.
10.
Install the power supply board, IPS board, RTC battery and backup battery,
display assembly, jack board, modem board, speaker, display mask, FL Inverter
board, LCD module, DAA module, upper cover and keyboard, HDD, CD-ROM
drive or FDD, optional memory module, optional PC card, and battery pack as
described in Sections 4.16 back through 4.2.
4-52
730CDT