Toshiba 730CDT Maintenance Manual page 155

4.9 DAA Module
Removing the DAA Module
To remove the DAA Module, follow the steps below and refer to Figures 4-22 to 4-25.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PC card, FDD or
CD-ROM drive, HDD, and upper cover and keyboard as described in Sections 4.2
through 4.8.
3. Carefully remove the DAA module lower cover.
4. Remove two M2.5x4 silver screws securing the DAA module jack cover and
remove the jack cover.
730CDT
Figure 4-22 Removing the lower cover screws
4-25