4.12 LCD Module
Removing the LCD Module
To remove the LCD module, follow these steps and refer to Figure 4-29.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, optional PC card, display
mask, and FL Inverter board as described in Sections 4.2, 4.3, 4.4, 4.10, and 4.11.
3.
Remove four M2.5x6 screws securing the LCD module to the LCD cover.
4.
Remove the tape, then carefully rotate the LCD module from right to left out of
the display cover and disconnect the LCD cable from CN1 on the LCD module.
Note the position of the noise-reduction gasket.
4-32
Figure 4-29 Removing the LCD module
730CDT