Checking Internal Battery Status; Connecting The Receiver And A Computer - Topcon HiPer Pro Operator's Manual

Configuration

Checking Internal Battery Status

To check the status of the internal batteries:
1. Check the BATT LED for battery status.
• A green light indicates greater than 85% charge.
• An orange light indicates an intermediate charge.
• A red light indicates less than 15% charge.
2. Do one of the following:
• Click on Configuration Receiver to view battery voltages
on the Receiver Configuration screen.
• Click on Help About to view battery voltages on the About
PC-CDU screen.
Connecting the Receiver and a
Computer
To configure, manage files, or maintain the receiver, connect the
receiver and a computer, and start PC-CDU:
• use a Bluetooth-enabled external device (computer)
• use an RS232 cable
• use a USB cable and a computer with the TPS USB driver
installed (available at http://www.topcongps.com/software/
updates.html)
Once you have established a connection between the receiver and the
computer (whether through Bluetooth wireless technology, the RS232
cable, or the USB cable), you will be able to:
• configure the receiver and its components
• send commands to the receiver
• download files from the receiver's memory
• load new firmware using FLoader™, OAFs, and configuration
files to a receiver
2-10
HiPer Pro Operator's Manual