Adjustment Of Geometry - Renault Clio Cup User Manual

2010 Release

4.2.4 ADJUSTMENT OF GEOMETRY

Body height
Body height is adjusted using the nut (1)
mounted on the support strut.
Loosen the locknut (2).
Adjust body height
loosening the nut.
Once the required height has been reached,
tighten the locknut.
Wheel alignment
Adjust the clip by means of the steering
tie-rod (1).
Loosen the locknut (2).
Adjust the alignment by tightening or
loosening the steering tie-rod.
One the required
tighten the locknut to 53Nm.
Camber
Adjust the camber by means of the upper
shock absorber mounting (point F).
Loosen the 3 plate bolts (1).
Adjust the camber.
Tighten the 3 bolts to 100Nm.
To avoid disconnecting the front left-hand drivetrain, driving with less than 3°
negative camber (more than -3°) on the front left-hand wheel is prohibited.
by tightening or
setting achieved,
E-10
1
2
1
2
1