Renault Clio Cup User Manual page 12

2010 Release
Disassembly
-
Remove the upper nut, holding the shock
1 -
absorber with a hexagonal socket wrench.
2 - Remove the snap ring (1).
Loosen the nut (5) and locknut (6) so that
3 -
the spring is relaxed (3).
Remove the retainer ring (2) from the
4 -
spring cup.
5 - Remove the suspension spring cup (3).
6 - Remove the suspension spring (4).
Unscrew the support strut shock absorber
7 -
rod
Reassembly
-
1 - Thoroughly clean the inside of the support strut and shock absorber cartridge.
2 - Replace the filters (ref 77 11 156 541) where necessary.
3 - Position the bump stop (ref 77 11 160 290) on the shock absorber rod.
4 - Lubricate the shock absorber cartridge with Bilstein grease (ref 77 11 126 744).
5 - Proceed in reverse removal order.
6 - Tighten the upper shock absorber nut to 105Nm.
Operations
1
2
3
4
5
6
Operations
E-12
Photos