Renault Clio Cup User Manual page 53

2010 Release
Removal
Unscrew the connectors (1) (allow for brake fluid
1 -
discharge).
2 - Remove the mounting bolts (2) and the wastegate.
Refitting
-
Fit the wastegate on the support using the two bolts
1 -
(2).
Place the connector ends in the wastegate's threaded
holes. Initiate threading manually.
2 -
Note: Follow the direction of assembly.
3 - Tighten the connectors to 13Nm.
4 - Drain the braking circuit.
Preset the wastegate to the centre position: 15 "clicks"
5 -
from one of the 2 end positions.
Operations
Operations
E-53
Photos
2
Photos
Output
Input
1
2