Renault Clio Cup User Manual page 40

2010 Release
Clio Cup is only officially approved by Renault Sport when fitted with Ferodo
Running in
Ferodo DS 1.11 brake pads do not require any specific running-in.
DS 2500 brake pad run-in protocol:
 Clean the brake disc with Emery paper (surface in contact with the pad).
 Remove all traces of previous friction.
 Create a 45° chamfer on the outer circumference of the pad if the discs
are hollowed.
 Perform 3 to 4 medium pressure braking operations (150 to 100kph).
 Allow to cool between braking (+/-400 meters).
 Perform 1 heavy pressure braking operation (180 to 100kph).
 Allow to cool (+/- 800meters).
 Repeat the process two or three times.
Under no circumstances during run-in should brake pad temperature exceed 300°C to
400°C.
Brake pad operation at low temperatures may lead to the build-up of friction
material on the disc. This deposit may cause vibrations when braking. Should this
occur, buff the discs to eliminate this phenomenon.
brake pads.
E-40