Renault Clio Cup User Manual page 14

2010 Release
EE' support
Removal
-
1 - Remove the wheel.
2 - Remove the point E nut (1).
Extract the EE' support from the point E ball joint;
3 -
a ball joint puller must be used to do this.
4 - Remove the point E' ball joint mounting bolt (2).
Remove the 3 EE' support mounting bolts on the
5 -
pivot holder (3).
6 - Remove the EE' support.
Refitting
-
Perform the removal steps in reverse order.
Tightening torques:
 Point E' mounting bolt: 26.5Nm.
 3 pivot holder mounting bolts: 105Nm.
 Point E nut: 105Nm.
Wishbone
Removal
-
Remove the attachment (1) of the anti-roll bar
1 -
at the level of the wishbone.
2 - Remove the point E nut (2).
Extract support EE' from the point E ball joint;
3 -
a ball joint puller must be used to do this.
Remove the two wishbone mounting bolts (3)
4 -
on the subframe.
5 - Remove the wishbone.
Operations
Operations
E-14
Photos
2
1
Photos
3
2
3
1