2010 Release
4.2.2 GEOMETRY INSPECTION
Body
height
measurement
points
Conditions
-
Body height measurement is
performed:
With the driver on
board.
On a flat surface.
With 50L of fuel in the
tank.
With new or identically
worn tyres.
Tyre pressure at 2 bars.
Measuring the front body height
-
The front body height is measured at the level of the lower front wishbone mounting (1).
Measuring the rear body height
-
The rear body height is measured at the level of the rear axle point A bolt.
Front
body
height
1
E-7
Rear
body
height
Ground projection
under subframe