Renault Clio Cup User Manual page 30

2010 Release
Removal
-
Operations
1 - Place the vehicle on an auto-lift.
Remove the front wheel on the relevant
2 -
side.
3 - Loosen the alignment locknut (1).
4 - Remove the point H nut (2).
Extract the ball joint from point H using
5 -
the tool: (1) Tav. 476.
6 - Remove the small bellows clamp (1).
7 - Cut the large bellows clamp (2).
Unscrew the steering tie-rod counter-
8 - clockwise and
rotations for refitting.
9 - Remove the steering tie-rod.
10 - Extract the bellows (3).
11 - Unlock the steering column.
Position the tool: (1) Dir. 1741 on the
12 -
steering bar, pinion side.
Release the axial ball joint using the (2)
13 -
Dir 1305-01 tool.
Remove the axial ball joint and steering
14 -
unit shim (1) (Ref 77 11 160 142).
Refitting
-
note the number
E-30
2
of
3
Photos
1
2
1
1