Renault Clio Cup User Manual page 42

2010 Release
Maximum authorized contact surface with the disc
The maximum front brake pad friction material surface area tolerated on the Clio Cup is
shown on the following diagram.
Brake calipers
The brake calipers cannot be repaired. If a fault is detected on the caliper, it must
be systematically replaced.
Removal
-
Disconnect the banjo bolt (1) linking the hose to
1 -
the caliper (brake fluid will pour out).
2 - Remove the brake pads (see previous paragraph).
3 - Remove the two caliper mounting bolts (2).
4 - Remove the caliper.
Refitting
-
1 - Fit the caliper on the pivot and attach it using its bolts (2).
2 - Tighten to 164Nm.
3 - Check the condition of the hose (replace if necessary) and attach with the banjo bolt.
4 - Tighten to 14Nm.
5 - Drain the braking circuit.
Operations
Operations
E-42
Photos
2
1