Configuration; Adjusting The Level Of Mini 1 And Mini 2 Monitor Outputs - Solid State Logic XL-Desk Owner's Manual

5 - Configuration

Adjusting the Level of MINI 1 and MINI 2 Monitor Outputs

Speaker sets often require level trimming to allow a consistent listening level when switching between different sets. XL-
Desk allows the MINI 1 and MINI 2 monitor outputs to be adjusted in 0.5dB steps.
To adjust a MINI speaker set:
1) Press and hold the MINI 1 button for three seconds. Upon entering this mode the MIX A bargraph meter
will change to make clear you have entered the setup mode correctly.
2) Press DIM to attenuate in 0.5 dB steps, press CUT to increase gain in 0.5 dB steps.
Adjust until the desired result is achieved.
3) Press the MINI 1 button again to exit the setup mode and return to normal operation.
To adjust MINI 2, repeat the process but replace MINI 1 button presses with MINI 2 button presses.
XL-Desk – Owner's Manual Page 27