OBJ_BUCH-0000000032-002.book Page 11 Thursday, July 21, 2011 8:17 AM
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(figure 2).
To loosen the clamping strap of the auxiliary
handle, turn the handle.
Strap
Slide the strap of the auxiliary handle in the
desired working position onto the collar until
the teeth engage into the recesses, and then
tighten.
Auxiliary handle
en
11
Auxiliary handle